OSHiN DECATUR GAHave your file? · Decatur, GA
Send the file today. Small prints, often ready tomorrow.
Small prints start at $40, which covers the first two hours of machine time, then $5 an hour after. No minimum order and no tooling cost. Upload what you have — an STL, a STEP, a photo, a sketch on a napkin — and we tell you the price and the date. No file yet? That's where every job starts. Printing every month? The Print Club makes it flat.
Order before 11am and today counts as a production day.
- Runs
- 1 to 5,000
- Tooling cost
- None
- Quotes
- Free
- Approval
- First-article available
What we print
If it's plastic, start here.
Production runs
1 to 5,000 units, no tooling cost. The sweet spot for getting real units into customers' hands before you pay for a mold.
Bridge manufacturing
Post-prototype, pre-injection-mold. Ship product now while the tooling gets sorted, or skip the mold entirely.
End-use parts
Not just models, parts that go into service and stay there, in the right material for the job.
Obsolete & replacement parts
The machine runs, the part is discontinued. Appliance, industrial, marine, RV, automotive restoration.
Overflow contract work
Running a farm at capacity? Send the file, count, and deadline, white-label, blind drop-ship.
The quiet money
Jigs, fixtures & tooling.
The parts that never leave a shop floor but make everything else faster and more accurate. If your process needs a custom fixture, we make it.
Assembly fixtures & alignment jigs
Hold parts square, speed the line, cut scrap.
Drill guides & soft jaws
Repeatable holes and secure work-holding for your machines.
Go / no-go gauges
Fast pass-fail checks on the floor, made to your dimensions.
Casting patterns & mold masters
Lost-PLA and investment patterns, silicone mold masters, vacuum-form bucks.
Rapid mold inserts
Bridge tooling for short injection runs without full hard tooling.
Jigs for other shops
Screen-print platens, garment and sublimation jigs, tooling for the trade.
Materials
Picked for the job, not the datasheet.
Tell us what the part does, how hot it gets, what it touches, whether it flexes, and we'll tell you which one to run. If none of them fit, we'll say so instead of selling you a run that fails in the field.
- First-article approval is available for production runs. When it is in your quote, nothing is made in quantity until you have approved the first part.
- Large-format pieces split, printed, and bonded.
- Multi-part assemblies fitted and bonded in-house.
- Reorders from your saved file, no re-setup.
How it goes
File in, parts out.
Send what you have
STEP, STL, 3MF, or a photo, sketch, or the part itself. No file is fine; that's file creation.
Free quote, fast
Price, material call, and a real date. No tooling line, no setup surprise.
First-article approval
Available on production runs, and quoted when it is. We print one, you check it against the drawing and the real assembly, and only then do we run the batch.
Pick up or we ship
Local pickup in Decatur, or boxed and shipped. Drop-ship to your customer available.
Questions
Before you send the file
What does 3D printing cost?
It depends on the part and the count, and the per-piece price drops hard as the count climbs. That's where the value is. Tell us the quantity you actually want and we'll show you exactly where the price breaks land for your job.
How many units can you run?
From a single prototype to production runs of 5,000+ on FDM, with no tooling cost. Larger volumes are quoted on a schedule, and we'll flag when an outsourced process (SLS, injection molding) beats FDM on price.
Can you hold tolerance?
Tell us which dimensions matter and what the part mates to. We'll tell you honestly what we can hold in the material you need, typically around ±0.1 to 0.3 mm on FDM, and the first article is where you verify it on the real assembly.
What if I don't have a 3D file?
Most people don't. Send a sketch, a photo, or the broken part and we'll build the model, see 3D file creation. On runs of 50 units or more, that design work comes off the production invoice.
Do you keep my file?
We keep it so reorders don't start from zero. You get full commercial use rights to it. Print it, sell what you make, forever. OSHiN retains rights to the base design; want it exclusive so we never reuse it? That's an add-on.
What if you can't print what I need?
We broker it. SLA resin, SLS/MJF nylon, metal DMLS, CNC, and urethane casting quote out through our partners and we manage the job, same contact, one invoice.
Proof
Customers who sent a file
5.0 from 10 Google reviews
Honestly the time it was done and the quality of the 3D print was amazing. I'm definitely going to have to send over another 3D print job here.
Shout out to this talented man! I need a piece 3D printed no longer than a nail 😭 and with trial and error OSHin was able to get the job done thanks.
Quick, professional and did I mention fast. I am happy I chose him for service. Thank you again and I will be back.
How pricing works
Two systems, and which one applies to you.
One-off jobs
A $40 service charge covers the first two machine hours, then $5 per additional machine hour. Material, setup, special handling and any outsourced process are quoted on top. There is no quantity minimum — one part is a valid order.
Print Club
A different system: a published monthly allowance of build plates and a faster production target, from $29 a month. Worth it once you print regularly rather than once. See the five levels →
What you get when you send a file
- A price and a date before you commitNo waiting on a quote to learn whether this was ever affordable.
- No quantity minimumOne part is a valid order. The minimum service charge is $40, which covers the first two machine hours.
- No tooling cost, everNothing to amortise. The tenth part costs what the tenth part costs.
- First-article approval, available on runsWhen it is in your quote, you see and hold one before we run five hundred.
- We keep your file for reordersThe second order is a message, not a project.
- Full commercial use rightsPrint it, sell what you make, forever. Exclusive ownership is available as an upgrade.
- We broker what we cannot printResin, SLS nylon, metal, CNC. One contact and one invoice, even when the machine is not ours.
- We say no when FDM is the wrong answerYou get told another process is cheaper, instead of being sold this one.
Machine time is $40 for the first two hours, then $5 an hour after, plus material. That $40 is the floor for a small print.
Where you stand if it goes wrong
- A quote costs nothing and commits you to nothingSend a photo. If it is not worth doing, we will tell you that instead of quoting it.
- We fix our mistakesA defect in our workmanship gets reprinted or refunded within 7 days of you receiving it. Garments you supply yourself are printed at your risk.
- First-article approval on runsAvailable for production runs. When it is included in your quote, quantity production begins only after you approve the first part.
Custom work is made to order, so it is not returnable for a change of mind — the full terms are here, in plain English.
Free quote